Page Comparison

[Config]

This subkey stores the general configuration values.

AdvancedAudit

This value is of type REG_DWORD, and determines whether Snare is using advanced audit policy or not. Set this value to 1 for using advanced audit policy, or 0 for using basic audit policy.

AgentLog

This value is of type REG_DWORD and sets the level of tracing sent by the agent.  Values include [0-5] where Fatal (0), Error (1), Warning (2), Info (3), Debug (8), Trace (9).


Audit

This value is of type REG_DWORD, and determines whether Snare is to automatically set the system audit configuration. Set this value to 0 for no, or 1 for Yes. Will default to TRUE (1) if not set. The audit configuration includes selecting the audit categories and the retention policy on ALL event log files.

CachePath

This is the disk cache path where the agent will temporarily save all unsent events if the agent needs to restart. 
Agent will read and send the events on next start.

Checksum

This value is of type REG_DWORD, and determines whether Snare includes an MD5 Checksum of the contents of each audit record, with the record in question. Set this value to 0 for no, or 1 for Yes. Will default to FALSE (0) if not set. Note that the checking application will need to strip the final delimiter, plus the MD5 Checksum, from the record before evaluating the record against the checksum.

Clientname

This is the Hostname of the client and is of type REG_SZ. If no value has been set, "hostname" command output will be displayed. Must be no more than 100 chars, otherwise will truncate.

CritAudit

This value is of type REG_DWORD, and determines whether Snare will only send an event for the highest criticality match

Delimiter

This is of type REG_SZ and stores the field delimiting character, ONLY if the destination format SYSLOG has been selected. If more than one char, only first char will be used. If none set, then TAB will be used. This is a HIDDEN field, and only available to those users that wish to set a different delimiter when using the SYSLOG header. This selection option will not be found in the Snare front end or the web pages.

EnableUSB

This value is of type REG_DWORD, and determines whether Snare should actively capture USB auditing events (XP/Vista/Windows7/10/11/2003/2008/2012/2016/2019/2022). Set this value to 0 for no, or 1 for Yes. Will default to FALSE (0) if not set.

To collect file based events on removable media it requires that advanced audit policies are set either at the GPO/Local Policy level to audit Object Access\Audit Removable Storage or Advanced auditing is enabled in the agent as the default objective policy 15 will capture the relevant eventids.

EventSourceId

This is of type REG_SZ and stores the Windows Registry path from where to read the Event Source Id text/value. If the value in EventSourceIdType is 2 (Registry Path), then the text/value in the registry, specified by the path, is included in each event.

EventSourceIdText

This is of type REG_SZ and directly stores the Event Source Id text/value. If the value in EventSourceIdType is 1 (Free Text), then this text/value is included in each event.

EventSourceIdType

This is of type REG_DWORD and stores the option related to specifying Event Source Id: 0(NONE), 1(Free Text), 2(Registry Path)

FileAudit

This value is of type REG_DWORD, and determines whether Snare is to automatically set the file system audit configuration. Set this value to 0 for no, or 1 for Yes. Will default to FALSE (0) if not set.

HeartBeat

This values is the frequency with which a heartbeat is sent, set in minutes.

This value determines whether heartbeats are logged to a file. Set this value to 0 for no, or 1 for Yes.

HeartBeatOutputPath

This is the path where the heartbeat messages are exported to, if selected.

HostGUID

This value is of type REG_SZ. Set to the GUID of the specific network card.

HostIP

LeaveRetention

This value is of type REG_DWORD and determines whether Snare should leave the existing Log Retention settings as they are on each event log. Set this value to 0 for no, or 1 for Yes. Will default to FALSE (0) if not set.

TLS13Minimum

UpgradePath

This value is of type REG_SZ.  The automatically generated path in which temporary upgrade files are stored.

UseHostIP

If checkbox set it resolves the machines IP address from the first wired adapter. It will not resolve wireless IP's 
at present. Set this value to 0 for no, or 1 for Yes.

UseUTC

This value is of type REG_DWORD and determines whether Snare should use UTC timestamps instead of the local system time when sending events. Set this value to 0 for no, or 1 for Yes. Will default to FALSE (0) if not set.

[FIM]

This subkey stores the file integrity monitoring configuration values.

FIM#

(where # is a serial number)

This section describes the format of FIM configurations. This value is of type REG_SZ, of no greater than 1060 chars and is composed of the following string:

type=[0|1],alg=[0|1],criticality=[0-4],[0-7],[0-7],[0-7],[0-10],[1-10],0,0,0,0,schedule=<CRON_FORMAT>,dirfilter=<DIR_PATH>,filefilter=<INCLUDE_FORMAT>,exclusions=<EXCLUDE_FORMAT>,features=DWORD,state=[0|1|2},uuid=<UUID>

type: integer 0 or 1 where 0 indicates File type and 1 indicates Registry type

alg: integer 0 or 1 and indicates the algorithm used to hash the data. SHA256 = 0, SHA512 = 1

criticality: integer between 0 and 4 that indicates the severity of the event. Critical = 4, Priority = 3, Warning = 2, Information = 1, Clear = 0. Next 3 values are Syslog for each RFC3164, RFC3164 Alt and RFC5424. Syslog values RFC3164 Alt and RFC5424 are copied from Syslog and not used separately. Values 0-7 denote Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug. CEF is  0 - 10, 0 is least severe and 10 is most severe. LEEF is  1 - 10, 1 is least severe and 10 is most severe. Last 4 values 0,0,0,0 are reserved and not in use

CRON_FORMAT: a string in the CRON format to indicate when the system is to scan.

Can be of the form CRON(<min>, <hour>, <day_of_month>, <month>, <day_of_week>) or of one of @hourly or @daily.

DIR_PATH: the full path of the directory from which to start scanning. A terminating path delimiter followed by a * denotes a recursive scan.

INCLUDE_FORMAT: the format of the files to include in the scan. The character * denotes the use of wildcards.

EXCLUDE_FORMAT: the format of the files to exclude from the scan. The * character denotes the use of wildcards.

features: an integer representing a bit-wise set of features.

state: an integer representing the state of FIM configuration. Disabled = 0, Enabled = 1, Requiring Service Restart = 2.

UUID: a string representation of a unique 16-byte value used to identify the configuration.


FAM#

(where # is a serial number)

This section describes the format of FAM configurations. This value is of type REG_SZ, of no greater than 1060 chars and is composed of the following string:

Folder c:\test Success FAM_CONTAINER_INHERIT_ACE|FAM_OBJECT_INHERIT_ACE FAM_GENERIC_ALL=1 Include * Include * 0 Include * 4,4,4,4,0,1,0,0,0,0

<AUDIT POLICY/OBJECT TYPE>: FILE | FOLDER

<AUDIT POLICY OBJECT>: File/Folder path

<EVENT TYPE>: SUCCESS | FAIL | BOTH

<AUDIT POLICY INHERIT SCOPE>: One or more of inherit values i.e. CONTAINER_INHERIT_ACE,INHERIT_ONLY_ACE,INHERITED_ACE,NO_PROPAGATE_INHERIT_ACE,OBJECT_INHERIT_ACE

<AUDIT POLICY PERMISSIONS>: Selected policy permissions i.e. ACCESS_SYSTEM_SECURITY={1,0},MAXIMUM_ALLOWED={1,0},GENERIC_ALL={1,0},GENERIC_EXECUTE={1,0},GENERIC_WRITE={1,0},GENERIC_READ={1,0},DELETE_ACCESS={1,0},READ_CONTROL={1,0},WRITE_DAC={1,0},WRITE_OWNER={1,0},SYNCHRONIZE_ACCESS={1,0}

<EVENT ID SEARCH TYPE>: INCLUDE | EXCLUDE

<EVENT ID SEARCH VALUES>: Comma separated numeric values

<GENERAL SEARCH TERM TYPE>: INCLUDE | EXCLUDE

<GENERAL SEARCH VALUES>: TEXT | WILDCARD FORMAT | REGEX FORMAT

<IS REGEX SEARCH>: 1 | 0

<USER SEARCH TYPE>: INCLUDE | EXCLUDE

<USER SEARCH VALUES>: Comma separated wildcard values

<CRITICALITIES>: Comma separated criticalities values

RIM#

(where # is a serial number)

This section describes the format of RIM configurations. This value is of type REG_SZ, of no greater than 1060 chars and is composed of the following string:

type=[0|1],alg=[0|1],criticality=[0-4],[0-7],[0-7],[0-7],[0-10],[1-10],0,0,0,0,schedule=<CRON_FORMAT>,regrootkey=<ROOT_KEY>,pathfilter=<REG_PATH>,inclusions=<INCLUDE_FORMAT>,exclusions=<EXCLUDE_FORMAT>,features=DWORD,state=[0|1|2},uuid=<UUID>

type: integer 0 or 1 where 0 indicates File type and 1 indicates Registry type

alg: integer 0 or 1 and indicates the algorithm used to hash the data. SHA256 = 0, SHA512 = 1

criticality: First integer is between 0 and 4 that indicates the severity of the event in Snare format as Critical = 4, Priority = 3, Warning = 2, Information = 1, Clear = 0. Next 3 values are Syslog for each RFC3164, RFC3164 Alt and RFC5424. Syslog values RFC3164 Alt and RFC5424 are copied from Syslog and not used separately. Values 0-7 denote Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug. CEF is  0 - 10, 0 is least severe and 10 is most severe. LEEF is  1 - 10, 1 is least severe and 10 is most severe. Last 4 values 0,0,0,0 are reserved and not in use

CRON_FORMAT: a string in the CRON format to indicate when the system is to scan.

Can be of the form CRON(<min>, <hour>, <day_of_month>, <month>, <day_of_week>) or of one of @hourly or @daily.

ROOT_KEY: a string representation of the windows registry root key from which to start scanning.

REG_PATH: a registry path to the key or value to scan. The character * denotes the use of wildcards.

INCLUDE_FORMAT: the format of the registry values to include in the scan. The character * denotes the use of wildcards.

EXCLUDE_FORMAT: the format of the registry to exclude from the scan. The * character denotes the use of wildcards.

features: an integer representing a bit-wise set of features.

state: an integer representing the state of RIM configuration. Disabled = 0, Enabled = 1, Requiring Service Restart = 2.

RAM#

(where # is a serial number)

This section describes the format of RAM configurations. This value is of type REG_SZ, of no greater than 1060 chars and is composed of the following string:

Registry MACHINE\SOFTWARE\InterSect Alliance\Epilog Both RAM_CONTAINER_INHERIT_ACE RAM_GENERIC_ALL=1 Include * Include * 0 Include * 2,4,4,4,0,1,0,0,0,0

<AUDIT POLICY/OBJECT TYPE>: REGISTRY

<AUDIT POLICY OBJECT>: Registry path

<EVENT TYPE>: SUCCESS | FAIL | BOTH

<AUDIT POLICY INHERIT SCOPE>: Always CONTAINER_INHERIT_ACE

<AUDIT POLICY PERMISSIONS>: Selected policy permissions i.e. ACCESS_SYSTEM_SECURITY={1,0},MAXIMUM_ALLOWED={1,0},GENERIC_ALL={1,0},GENERIC_EXECUTE={1,0},GENERIC_WRITE={1,0},GENERIC_READ={1,0},DELETE_ACCESS={1,0},READ_CONTROL={1,0},WRITE_DAC={1,0},WRITE_OWNER={1,0},SYNCHRONIZE_ACCESS={1,0}

<EVENT ID SEARCH TYPE>: INCLUDE | EXCLUDE

<EVENT ID SEARCH VALUES>: Comma separated numeric values

<GENERAL SEARCH TERM TYPE>: INCLUDE | EXCLUDE

<GENERAL SEARCH VALUES>: TEXT | WILDCARD FORMAT | REGEX FORMAT

<IS REGEX SEARCH>: 1 | 0

<USER SEARCH TYPE>: INCLUDE | EXCLUDE

<USER SEARCH VALUES>: Comma separated wildcard values

<CRITICALITIES>: Comma separated criticalities values

[AdvObjective]

This subkey stores all the filtering advanced audit policies.

AdvObjective#

(where # is a serial number)

This section describes the format of the advanced audit policies (formerly known as Objectives). Audit Policies are of type REG_SZ and composed of the following JSON format.

Registry Value:

{
"events": [],             // all selected high level events / sub-categories in audit policy

"event_id_match": {
"exclude": "0",             // 0 for include
"data": []                      //all given event ids
},

"general_match": {
"exclude": "0",           // 0 for include
"data": "***"              // (*) at start and end of the string
},

"general_match_regex": "0/1",

"user_match": {
"exclude": "0-1",       // 0 for include
"data": []                   //all given user 
},

"source_match": {
"exclude": "0-1",        // 0 for include
"data": []                   //all given sources 
},

"event_type": {
"ActivityTracing": "0/1",
"Critical": "0/1",
"Error": "0/1",
"FailureAudit": "0/1",
"Information": "0/1",
"SuccessAudit": "0/1",
"Verbose": "0/1",
"Warning": "0/1"
},

"log_type": {
"Application": "0/1",
"CustomEventLog": "0/1",
"DFSReplication": "0/1",
"DNSServer": "0/1",
"DirectoryService": "0/1",
"LegacyFRS": "0/1",
"Security": "0/1",
"System": "0/1"
},

"criticality": {
"snare_alert_level": "0-4",
"syslog3164_alert_level": "0-7",
"syslogAlt_alert_level": "0-7",
"syslog5424_alert_level": "0-7",
"cef_alert_level": "0-10",
"leef_alert_level": "0-10",
"reserve1": "0",
"reserve2": "0",
"reserve3": "0",
"reserve4": "0"
}
}

Criticality- Critical = 4, Priority = 3, Warning = 2, Information = 1, Clear = 0. Next 3 values are Syslog for each RFC3164, RFC3164 Alt and RFC5424. Syslog values RFC3164 Alt and RFC5424 are copied from Syslog and not used separately. Values 0-7 denote Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug. CEF is  0 - 10, 0 is least severe and 10 is most severe. LEEF is  1 - 10, 1 is least severe and 10 is most severe. Last 4 values 0,0,0,0 are reserved and not in use.

EventID Match Type (event_id_match.exclude): = 0 (Include events that match the event id; = 1 for Exclude)

General Match Type (general_match.exclude): = 0 (Include events that match general search term in the event; = 1 for Exclude)

User Match Type (user_match.exclude): = 0 (Include events that match user search term; = 1 for Exclude)

Source Match Type (source_match.exclude): = 0 (Include events that match source search term; = 1 for Exclude)

Event Type: The different event types are mentioned and those values are checkboxes where checked = 1.

Event Log Type: The different log types are mentioned and those values are checkboxes where checked = 1.

The match terms (event_id_match.data, general_match.data, user_match.data and source_match.data) are the filter expressions and are defined to be any value (except TAB) which includes DOS wildcard characters. Note that these are NOT regular expressions with the exception of the General Match term. This has the option of interpreting the search string as a Perl Compatible Regular Expression by selecting the checkbox (Regular expression) next to it. If it is not selected, the default simple search is used.

NOTE: Semicolons are actually "TAB" characters.

[Objective]

This subkey stores all the filtering audit policies.

Objective#

(where # is a serial number)

This section describes the format of the audit policies (formerly known as Objectives). Audit Policies are of type REG_SZ, of no greater than 1060 chars, and is composed of the following string (the figures in the brackets represent the maximum size of the strings that can be entered):
Criticality(DWORD);Event Type(DWORD);Event Log Type(DWORD);EventID Match[256];General Match[512];UserMatchType(DWORD);User Match[256];EventIDMatchType(DWORD);GeneralMatchType(DWORD); SourceName Match[256];SourceNameMatchType(DWORD);TruncateList[2048];

Criticality- It consists of a string with 10 values [0-4],[0-7],[0-7],[0-7],[0-10],[1-10],0,0,0,0. First integer between 0 and 4 that indicates the severity of the event. Critical = 4, Priority = 3, Warning = 2, Information = 1, Clear = 0. Next 3 values are Syslog for each RFC3164, RFC3164 Alt and RFC5424. Syslog values RFC3164 Alt and RFC5424 are copied from Syslog and not used separately. Values 0-7 denote Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug. CEF is  0 - 10, 0 is least severe and 10 is most severe. LEEF is  1 - 10, 1 is least severe and 10 is most severe. Last 4 values 0,0,0,0 are reserved and not in use

User Match Type: =0 (Include users that match user search term type; =1 for Exclude)

EventID Match Type: =0 (Include events that match the entire audit policy; =1 for Exclude)


Event Type: Success=16, Failure=8, Error=4, Information=2, Warning=1. (These values are checkboxes, hence the sum of the selected values is recorded).


Event Log Type: Custom=64, Security=32, System=16, Application=8, Directory Service=4, DNS Server=2, File Replication=1. (These values are checkboxes, hence the sum of the selected values is recorded).

The match terms (EventID Match, General Match and User Match) are the filter expressions and are defined to be any value (except TAB) which includes DOS wildcard characters. Note that these are NOT regular expressions with the exception of the General Match term. This has the option of interpreting the search string as a Perl Compatible Regular Expression by selecting the checkbox next to it. If it is not selected, the default simple search is used.
NOTE: Semicolons are actually "TAB" characters.

[Network]

This subkey stores the general network configurations.

CacheSize

CacheSizeEventLog

CacheSizeM

This value is of type REG_DWORD, and determines the size of the in memory cache. The value must be between 1 and 1024.If this is set then CacheSize cannot be altered.


CacheSizeSet

This value is of type REG_DWORD, and determines if the agent should set the Windows Event Log size (0 for No, 1 for Yes).

Destination1Delimiter

This sub key is of type REG_SZ and is a comma separated list of destinations, which should be a maximum of 100 characters each. It details the IP address or hostname which the event records will be sent (NB: multiple hosts only available in supported agent). See Appendix - Delimiters.


Destination1Port

This value is of type REG_DWORD, and determines the Destination Port number. This value must be in 1-65535 range. Will default to 514 if a SYSLOG header has been specified.

NotifyMsgLimit

This value is of type REG_DWORD having value 0 or 1, and determines whether to send or not the EPS notification to server (1 means send and 0 means not to send) whenever agent reaches EPS RateLimit. This feature only appears in supported agents.

NotifyMsgLimitFrequency

This value is of type REG_DWORD, and determines the frequency of events per second notification. The value is treated in minutes and only one EPS notification message is sent to server regardless of how many times agent reaches EPS limit during these minutes. This feature only appears in supported agents.

RateLimit

This value is of type REG_DWORD, and determines the upper limit for events per second (EPS) that the agent will send to server. This feature only appears in supported agents.

SyslogDynamicCritic

This value is of type REG_DWORD, and represents the entry DYNAMIC for SYSLOG Priority, for SYSLOG format.

TruncateList

This is a CRLF separated list of strings which result in event truncation if matched in the event text.

[Log]

This section describes the format of the log monitors. Log monitors are of type REG_SZ, of no greater than 512 chars, and is composed of the following string:
Logtype | LogPath
LogType is optional and is used to inform the Snare server how to process the data stream.
The LogPath is the fully qualified path to the log file that needs to be monitored or the fully qualified path to the directory containing date stamped log files of the form "YYMMDD" (in this case a trailing backslash ('\') is required). Spaces are valid, except at the start of the term.

Filter#

(where # is a serial number)

This section describes the format of the filters. Filters are of type REG_SZ, of no greater than 1060 chars, and is composed of the following string (the figures in the brackets represent the maximum size of the strings that can be entered):

Criticality(DWORD)General Match[512]GeneralMatchType(DWORD)

Criticality- Format for this string is [0-4],[0-7],[0-7],[0-7],[0-10],[1-10],0,0,0,0. First integer is between 0 and 4 that indicates the severity of the event. Critical = 4, Priority = 3, Warning = 2, Information = 1, Clear = 0. Next 3 values are Syslog for each RFC3164, RFC3164 Alt and RFC5424. Syslog values RFC3164 Alt and RFC5424 are copied from Syslog and not used separately. Values 0-7 denote Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug. CEF is  0 - 10, 0 is least severe and 10 is most severe. LEEF is  1 - 10, 1 is least severe and 10 is most severe. Last 4 values 0,0,0,0 are reserved and not in use.

eg. criticality=2,5,5,5,7,9,0,0,0,0

match (General Match)  - The General match term is the filter expression, and is defined to be any value which includes DOS wildcard characters. It can also include regular expressions if 'regex' box is checked.

eg match="*"

General Match Type - Include/Exclude. If checked Include then match or general match term is equated as [ = ] if checked exclude then it is [ != ].

Regex: =0 (Include general string term to match); =1  (Include regex string term to match)

eg. regex=0

[Remote]

This subkey stores all the remote control parameters.

AccessKey

This value is of type REG_DWORD and is used to determine whether a password is required to access the remote control functions. It is set to either 0 or 1, with 0 signifying no password is required.

AccessKeySet

This is of type REG_SZ, and stores the actual password to be used, in encrypted format.

AccessKeySetSnare1

This is of type REG_SZ, and stores the DIGEST password to be used (username "snare"), in encrypted format.

AccessKeySetSnare2

This is of type REG_SZ, and stores the DIGEST password to be used (username "Snare"), in encrypted format.

AccessKeySetSnare3

This is of type REG_SZ, and stores the DIGEST password to be used (username "SNARE"), in encrypted format.

Allow

"Allow" is of type REG_DWORD, and set to either 0 or 1 to allow remote control. If not set or out of bounds, will default to 0/NO (ie; not able to be remote controlled).

AllowBasicAuth

Only available via the registry. Set to 0 by default. Enable if agent should support basic http authentication in 
the web UI.

Restrict

This value is of type REG_DWORD, and set to either 0 or 1 to signal whether the remote users should be restricted via IP address or not. 0 = no restrictions.

RestrictIP

This is of type REG_SZ and is the IP address set from above.

WebPort

This value is the web server port, if it has been set to something other than port 6161. It is of type REG_DWORD. If not set or out of bounds, it will default to port 6161.

[SAM]

Stores the Snare Agent Manager settings

SAM1AuthKey

Key used by the agent to communicate with the Snare Agent Manager.

SAM1IP

The IP/hostname of where SAM is installed, that will communicate with the agent.

SAM1Port

The port number the agent uses to communicate with SAM, port 6262.

[State]

SAMCToken

Token provided by SAM to the agent.